Motorcycle Speedo Healer SMD PCB - V0.98

Made some adjustments to the board. I decided I should put the regulator on the backside so that it has access to the large copper layer for heat sinking. The regulator can easily be hand soldered once the upper components have been re-flowed. I'm planning on using the tried and tested "toaster oven" method of production for these boards as a number of the parts I've used would be hard to solder with my hot air work station.

I've also made a little "FromOrbit" logo, it's pretty basic but I like it. :)

I'll post the schematic and board layouts soon. They are done with open source tools (gEDA Gschema and PCB).